Payment & Shipping Terms:
|Type:||AC Power Cord||Approval:||SAA|
|Male End:||SAA Plug||Color:||Any Color Is Available|
|Female End:||IEC Or Strip||Grounding:||No|
Molded 2 Prong New Zealand Power Cord 10A SAA AS 3112 With 2 Wires
AS 3112 Australia 2 prong power cord plug with SAA certification. Rated up to 10A 250V. Our AS 3112 two prong Australia power cord products are fully molded with a low profile ergonomic design and RoHS and REACH compliant.
These are also referred to as AS 3112 2 pin mains plug and Australia two prong mains plug. AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50% from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. This YP-36 Australian 2 prong power plug is the most common Australia 2 prong plug in use for standard and custom Australia mains power leads.
New Zealand uses the exact same products as Australia and calls this plug the NZS 3112 or AS/NZS3112.
|Plug Standard||Australia 3P plug|
|Maximum Current rating||10A|
|Number of Poles and Wires||2 poles, 2 wires|
|Temperature Rating||minus 60C though plus 105C|
|Environmental Certifications||RoHS, REACH|
|Testing||Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity|
|Cord Type||Electrical Rating (Amps/Volts)|
|a) 4V-75 2X0.75mm2 - 1.0mm2
b) DL2 4V-75 2X0.75mm2 - 1.0mm2
c) H03VVH2-F 2X0.75mm2
d) H05VV-F2X0.75mm2 - 1.0mm2
DL3 4V-75 3X0.75-1.5mm2