Payment & Shipping Terms:
|Type:||AC Power Cord||Approval:||SAA|
|Male End:||SAA Plug||Color:||Any Color Is Available|
|Female End:||IEC Or Strip||Grounding:||YEs|
250v power cord,
international power plugs
AS 3112 10A IEC International Power Cords , SAA Ground Australia Power
AS 3112 Australia three prong power cord plug with SAA certification. Rated up to 10A 250V. Our AS 3112 Australia power cord products are fully molded with a low profile ergonomic design and RoHS and REACH compliant. These are also referred to as AS/NZS 3112 mains plug and Australia mains plug.
AS/NZS 3112 is the standard plug specification used in Australia and New Zealand and requires that the live and neutral prongs have at least 50% from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. This YP-35 Australian power plug is the most common Australia 3 prong plug in use for standard and custom Australia mains power leads.
New Zealand uses the exact same products as Australia and calls this plug the NZS 3112 or AS/NZS3112.
|Plug Standard||Australia 3P plug|
|Maximum Current rating||10A|
|Number of Poles and Wires||2 poles, 3 wires|
|Outer Mold Material||50P PVC|
|Blade Material||Nickel coated Brass|
|Flamability Rating||UL 94V-0|
|Color||Custom cable color available|
|Cable length||Custom cable length available|
|Temperature Rating||minus 60C though plus 105C|
|Environmental Certifications||RoHS, REACH|
|Testing||Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity|
|Cord Type||Electrical Rating (Amps/Volts)|
|H05VV-F 3x0.75-3x1.5mm2 , H05RN-F 3x0.75-3x1.0mm2
H05RR-F 3x0.75-1.0mm2 , H07RN-F 3x1.5mm2
4V-75 0.6/1KV 3x1.0mm2 , 4V-75 0.6/1KV 3x1.5mm2
10A 250V with insulated plug pins Australia standard plug technical drawing.
Contact Person: Jason